3.8
Installing Patch Ends
CVW-EXA284/224
1.
Apply gasket to case body (per previous instructions).
2.
If present, remove protective film from inside wall of Patch
End.
3.
Place Patch End to line up with bolt holes.
4.
From inside unit ratchet in M8 & optional M5 bolt into Patch
End until secure.
5.
Apply Silicone sealant between inside of Patch End and lower
frame (see drawing to the left for details).
6.
Attach side cover (item 3 in above drawing)
Gasket
①
M8 Bolts
②
Side Cover
③
Suction Lamp Cover Joint
④
M5 Bolts
⑤
CVW-EXA184/124
Apply silicone sealant inside
after installing the patch end.
13
Need help?
Do you have a question about the CVW-EXA284 and is the answer not in the manual?
Questions and answers