Panasonic CF-19 Series Reference Manual page 49

Wireless Switch Utility
To check the wireless communication status
Place the cursor over the Wireless Switch Utility icon (
A
A tool tip appears.
NOTE
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter standby or hibernation immediately after turning on/off the switch.
Do not turn on/off the switch while Windows is starting up.
To use wireless communication, set the wireless device ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enable]
(default) in the [Advanced] menu of the Setup Utility (
When you set [Wireless Switch] to [Disable] in the [Advanced] menu of the Setup Utility (
Switch Utility icon will not appear in the notification area. All wireless equipment (Wireless LAN, Bluetooth, Wireless
WAN) will remain ready irrespective of the wireless switch setting.
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager] (
You can check the wireless LAN communication status in Intel
lowing procedures.
• Double-click ,
• Click [start] - [All Programs] - [Intel PROSet Wireless] - [Intel PROSet Wireless].
, , or
on the notification area.
or ) on the notification area.
page 61).
page 53), the display will be changed accordingly.
®
PROSet/Wireless Software. Perform either of the fol-
49
page 61), the Wireless