Panasonic CF-19 Series Reference Manual page 33

SD Security
After making this setting, the following functions will be disabled.
• Displaying the Welcome screen
• The Fast User Switching function
• Remote desktop connection
When you add the check mark for [Do not check the user name], you can register the user name that is different
from the Windows user name. Click [Yes] at the confirmation message. When restarting the computer and log-
ging on to Windows, you will need to enter the Windows user name and the password without using the SD
Memory Card.
A [PRIVATE] folder will be created in the SD Memory Card, and the encrypted Windows logon user name and
the password will be registered.
Do not delete [PRIVATE] folder. Doing so will cancel [Use when logging on to Windows].
To use both when starting the computer and when logging on to Windows
Add the check mark to both [Use when starting computer] and [Use when logging on to Windows], and follow the
above steps.
CAUTION
Do not lose the setup card.
Do not leave the setup card in the slot when you go away from the computer.
To change the settings / To set up the second SD Memory Card
Start the SD Card Setup program (
A
The screen is different from the initial setup screen.
Change the settings.
B
[Setting for this computer]
You can change the settings registered in this computer.
[Setting for this SD card]
You can change the settings of the inserted SD Memory Card.
Click [OK].
C
Make the necessary settings.
D
Refer to the initial setup procedure above.
You may need to enter the password to proceed the steps.
Restart the computer.
E
1 3
page 31 Step - ).
33