Compal ACY25 series Service Manual page 93

5. Release the LCD cable from its hook to the left of the FL inverter board.
6. Detach the HV cable from the right of the FL inverter board.
Figure 5-12: Detaching the FL inverter board
7. Remove one M2.5×3 screw securing the FL inverter board.
8. Gently lift out the FL inverter board and detach the FL FPC from its left-hand end.
Figure 5-13: Detaching the FL FPC
9. Remove the LCD array and place face down.
10. Remove two pieces of tape sticking the LCD cable to the LCD array.
11. Detach the LCD cable from its connector
Chapter 5-15