Compal ACY25 series Service Manual page 27

Set User Password / Set Administrator Password
Enter This field always shows the message.
While these fields are highlighted and press 'Enter', a window similar to the following is
shown:
Set Administrator Password
Enter New Password
Confirm New Password [
If there is an old password then setup will prompt with the following window instead and a
current password will be required to be entered at first:
Set Administrator Password
Enter current password [
Enter New Password
Confirm New Password [
User can now type password in field "Enter New Password", and re-enter password in field "
Confirm New Password " for verification.
If the verification is OK:
The password setting is complete after user presses enter.
If the current password entered does not match the actual current password:
If the new password and confirm new password strings do not match:
The format of the password is as follows:
Length
Chapter 2-18
[
[
Setup Notice
Changes have been saved.
[ continue]
Setup Warning
Invalid password
Re-enter Password
[ continue]
Setup Warning
Password do not match
Re-enter Password
No more than 8 characters.
]
]
]
]
]