Table of Contents
Advertisement
6.
Turn the computer over. Remove two M2.5×9 screws from the base and two M2.5×7
screws from the rear panel.
7.
Turn the computer upright. Open the display so that it is perpendicular to the desk, then
gently lift off the display.
Disassembling the display assembly
1. Remove two mask seals and two M2.5×7 screws securing the LCD bezel. If disassembling
the 14" display, two M2.5×5 screws must also be removed from the top of the LCD bezel.
Chapter 5-12
Figure 5-7: Removing two screws securing the display assembly
Figure 5-8: Lifting off the display assembly
Advertisement
Table of Contents
Troubleshooting
