Changing The Internal Settings - Epson IP-100 Setup And Direct Printing Manual

6. Press the Start Print button.
The photographs in the selected range are printed out one
after another.
Printing the selected range of photographs on a single sheet
Load an A4 size sheet of paper, and select A4 for PAPER Size and
either 2L/4x6
the Start Print button. For details on settings, see "Making Settings
on the Display" on page 2-8.

Changing the Internal Settings

You can change the internal settings to trim photo images, print
an index with printing date and time, adjust the print start
position, and turn the voice guidance on or off.
Follow these steps to change the internal settings:
1. Press the Frame and Filter buttons at the same time to enter
the Internal Settings mode.
The Frame and Filter lights begin flashing and the No. and
Set No. appear on the display. The cursor is at No.
2. Press the Change Settings buttons to select the item number.
3-22
Printing Photo Directly with PC Cards
, L , E
No. Item
1 Trimming
2 Index date and time
3 Print start position, vertical
4 Print start position, horizontal
5 Voice guidance
, or Card for Layout. Then, press