Epson IP-100 Setup And Direct Printing Manual page 87

Display
indication
6-4
Troubleshooting
Error
Printer internal
adjustments.
System error.
The Input switch is
not properly set.
The black ink
cartridge is not
installed or it is
empty.
The color ink
cartridge is not
installed or it is
empty.
Paper has
jammed inside
the printer or it is
not loaded.
Paper has
jammed inside
the printer.
The ink cartridge
is not installed
properly.
Action
Turn the printer off. After a
few seconds, turn it on again.
If the error is not cleared,
contact your dealer.
Turn the printer off. After a
few seconds, turn it on again.
If the error is not cleared,
contact your dealer.
Turn the printer off and set the
Input switch to the INT side.
Turn the printer on and try
printing a photograph.
Install a cartridge or replace
the old one with a new one
(S020093).
See "Replacing Ink
Cartridges" on page 5-2.
Install a cartridge or replace
the old one with a new one
(S020110).
See "Replacing Ink
Cartridges" on page 5-2.
Open the printer cover and
remove the jammed paper.
Load the paper properly in
the sheet feeder and press
the E Load/Eject button.
Open the printer cover and
remove the jammed paper.
Check the ink cartridge and
install it properly.
See "Replacing Ink
Cartridges" on page 5-2.