Epson IP-100 Setup And Direct Printing Manual page 103

Installing on Windows
Follow these steps to install the printer software:
1. Insert the printer software CD shipped with your printer in
the CD-ROM drive. The Installer dialog box appears.
2. Click Install Printer Driver/Utility to start the printer software
installation.
3. When the installation is complete, click OK .
Note:
If the New Hardware Found screen or any other Wizard appears
when you turn on your computer, click Cancel and follow the steps
above.
Installation time varies depending on your computer.
EPSON Status Monitor 2 installation starts automatically. Click
Cancel if you do not want to install this utility. If you want to
install it later, see "Checking Printer Status and Managing Print
Jobs for Windows" in the online User's Guide.
For information on opening and using the software, see "Printing
Your First Page for Windows" on page 7-15. See also "Using the
Printer Software for Windows" in the online User's Guide.
If you use your printer on a network with Windows 95, 98, or NT
4.0, see "Network Printing" in the online User's Guide.
7-6
For Use with a Computer