System Settings At Thermostat - Trane Schlage LiNK TZEMT400BB32MAA Installation And Setup Manual

16
Set Time and Date
a. Press the MENU button twice.
11:15 PM
MENU MODE
MENU button
b. Scroll up or down to User Settings (it is the first option),
then press the Select button.
Menu Selection
User Settings
Usage Graph
ESM Setpoints
ZWave Install
Done
17
If your System Type is:
 Gas Furnace - Single Stage
 Gas Furnace - Multistage
 Electric Furnace
 Heat Pump
, perform step 18C
• Note: It may be necessary to go back and review step 6 in the installation section to verify the differences between
the system types.

System Settings at Thermostat

78 68 H
78 C
FAN RUN
Select
Select button
, go to step 19
, perform step 18A
, perform step 18B
c. Scroll up or down to Set Clock (it is the first option), then
press the Select button.
Set Clock
Filter Service
Maint Service
Screen Timeout
Done
3
d. Press or
e. Scroll up or down (+ or -) to make changes.
Press the Set button when you are finished.
f.
Scroll
up
Time
Date
Day
Scroll
Back
down
g. Press the Done button twice to exit the menu.
User Settings
Select
Select button
4
to highlight the data you want to change.
Set Clock
10
:15 PM
3 / 23 / 09
Mon
Set
Set button
Scroll
up
Scroll
down
Scroll
up
Scroll
down
8