Answering A Video Calling - Sharp WX-T82 User Manual

Tip
• If the called party's phone is not video calling
enabled, you can press F and enter the phone
number again to make a voice call.

Answering a Video Calling

When an incoming call is detected, the phone rings.
Press D to answer the call with video or press
1.
[Options] and select "Hide Picture" to answer with
voice only.
If the slider is closed, you can answer the call (with
video) by sliding open the phone when the "Calls on
Open" function is enabled.
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller's network
sends the number, the caller's number is displayed on
the screen. If the caller's name and number are saved
in the Phonebook, the caller's name is displayed on
the screen.
Rejecting an Incoming Call
Press F while the phone is ringing to reject a call
1.
you do not wish to answer.
You can reject an incoming call by sliding close
your phone if "Calls on Close" is set to "End Call"
in Slider Settings (p. 125).
Letting the Caller Know You are Unavailable
1.
Press [Busy] while the phone is ringing to send a
busy tone to the caller of an incoming call letting
them know that you cannot answer the call.
In Call Menu (Video Calling)
Muting the Microphone
1.
During a video calling, press [Mute].
To use the microphone again, press [Unmute].
Swapping Images
You can swap images between the main and sub
screens.
1.
During a video calling, press [Options] and select
"Switch Images".
Voice Call/Video Calling Functions 31