Making A Video Calling; Answering A Video Calling - Sharp WX-T71 User Manual

Muting the Microphone
1.
During a call, press [Mute].
To unmute the microphone, press [Unmute].

Making a Video Calling

Note
• Use this function with only the video calling enabled
phones.
• Make sure that the battery is fully charged and the
signal is strong before using this function.
• Turn the loudspeaker on or use a switch-equipped
Stereo Headset so that you can talk while looking at
the video calling screen on the main display.
Making a Video Calling
1.
Enter the area code and the phone number you wish
to dial and press S, or press [Options] and select
"Video Calling" to dial.
If you enter the wrong number, press U to delete
the number to the left of the cursor.
When the line is connected, the image of the called
party is displayed upper on the screen, and yours
lower left.
Tip
• If the called party's phone is not video calling
enabled, you can press F and enter the phone
number again to make a voice call.

Answering a Video Calling

When an incoming call is detected, the phone rings.
Press S or D to answer the video calling or press
1.
A [Answer] to select "Hide Picture", "Show
Picture", "Reject Call" or "Busy".
Tip
• If you have subscribed to the Calling Line
Identification (CLI) service and the caller's network
sends the number, the caller's number is displayed on
the screen. If the caller's name and number are saved
in the Phonebook, the caller's name and phone
number are displayed on the screen.
Voice Call/Video Calling Functions 29