Sharp WX-T82 User Manual page 146

Bluetooth Wireless Settings
With this setting you can rename your phone, prevent
other devices from recognising your phone and turn the
Bluetooth wireless function off automatically to save
battery power, etc.
To Rename Your Phone
You can rename your phone. The name is shown on
other devices when your phone is detected.
→
"Connectivity" "Bluetooth"
→
Settings" "Device Name"
1.
Enter the new device name.
To Turn Off Automatically
→
"Connectivity" "Bluetooth"
→
Settings" "Bluetooth Timeout"
1.
Select the desired time.
Your phone turns the function off automatically
after the specified time.
To Select the Sound Output
→
"Connectivity" "Bluetooth"
→
Settings" "Sound Output"
1.
Select "Phone/Earphone" or "Bluetooth Device".
(M 12-1-6)
→
"Bluetooth
→
"Bluetooth
→
"Bluetooth
To Switch the Handsfree Settings
You can switch modes of the handsfree kit between two
modes; talking with the handsfree kit or talking with the
phone.
→
"Connectivity" "Bluetooth"
→
Settings" "Handsfree Setting"
1.
Select "Handsfree mode" or "Private mode".
"Handsfree mode": For talking with the handsfree
"Private mode":
To Turn the Authentication Request On or Off
You can request the sender or receiver of the data to
authenticate the passcode (exchanging the passcode)
before pairing devices.
→
"Connectivity" "Bluetooth"
→
Settings" "Authentication"
1.
Select "On" or "Off".
Note
• No authentication is required for the paired devices.
• Even if you select "Off", you may authenticate the
passcode when the sender requests it.
To See Your Phone Details
→
"Connectivity" "Bluetooth"
→
Settings" "My Phone Details"
→
"Bluetooth
kit
For talking with the phone
→
"Bluetooth
→
"Bluetooth
Connectivity 145