Accessing Other Partitions; To Access Another Partition; Global Arming - Honeywell Ademco VISTA-32FB User Manual

To Access Another Partition

Each keypad is assigned a default partition for display purposes, and will
show only that partition's information. But, if the user is authorized, a
keypad in one partition can be used to perform system functions in other
partitions by using the GOTO command. Note that only those partitions
authorized and programmed by the installer can be accessed in this manner.
To GOTO another partition:
1. Enter your security code, then press
Entering partition number 0 will return the keypad to its original
partition.
LOG-ON TO
2.
PART. X COMPLETE

Global Arming

The Global Arming option may have been programmed for use by some users.
If Global Arming was enabled for use with your security code, a keypad
prompt (message) will appear after pressing one of the arming function keys
(Stay, Instant, Away, Maximum, Off). Follow the keypad prompts to continue
arming the system. See your installer for detailed instructions on the use of
this feature.
If global arming does not apply to your security code, use the procedures
described in the following pages.

Accessing Other Partitions

The keypad will remain in the new partition
AAAA
until directed to go to another partition, or
until 2 minutes has elapsed with no keypad
activity.
AAAA = alpha descriptor programmed by the
installer
X = partition number
READY
✳
+ partition number (0-8).
–21 –