Master Keypad Definitions - Honeywell LYNXR-2 Series Security System User Manual

SYSTEM OVERVIEW SYSTEM OVERVIEW
SYSTEM OVERVIEW SYSTEM OVERVIEW

Master Keypad Definitions

20
19
18
17
16
15
When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another. If 2
seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning.
NOTE: Different timeouts may occur when defining auxiliary functions and setting the real-time clock.
Note: The system functions described below are for reference only and require additional key entries to activate.
1. DISPLAY WINDOW: Liquid Crystal Display
(LCD). Displays protection point identification
and system status,
instructions.
2. ARMED INDICATOR:
system has been armed
DELAY). Blinks when armed and fault exists, or
once per second when AVM (VOX or Talk) or
speaker phone mode is active.
21
1
14
13
IMPORTANT!
messages, and user
(RED) Lit when the
(STAY, AWAY, NO
3
2
12 11 10
3. READY INDICATOR: When lit, indicates
system is ready to be armed; blinking indicates
system is not ready (a zone is open). Blinks once
per second when AVM (VOX or Talk) or speaker
phone mode is active.
PLAY
4. KEY: Announces a user's message if
one was previously recorded. See RECORD
function. Used to adjust volume of voice
messages.
– 12 –
4
5
6
7
8
9
09015-003-V0