System Unit Cover And Internal Configuration - Compaq DESKPRO 386 Maintenance And Service Manual

7.6 SYSTEM UNIT COVER AND
INTERNAL CONFIGURATION
To remove the system unit cover, follow these
steps:
1. Complete the removal procedures in the
following sections:
a. 7.2 MONITOR
b. 7.3 KEYBOARD
c. 7.5 PREPARING THE SYSTEM UNIT
FOR THE INTERNAL REMOVAL
AND REPLACEMENT PROCEDURES
Maintenance and Service Guide
WARNING
Before removing the cover, be sure that the
ON/OFF switch is in the OFF position and
the AC power cord is disconnected.
2. Remove the three screws on the back of the
system unit (Figure 7-8).
Figure 7-8. Location of the Three Screws on the Back of
the System Unit.
7-9