Appendix C - Dun-Bind.sh - Acer Ferrari 3400LMi Manual

F8­x86_64 on the Acer Ferrari 3400LMi
Appendix C – dun­bind.sh
#!/bin/sh
#
# Available at http://ferrari.databa.se/3400/f8/dun­bind.sh
#
# A verbose sample script for finding the Dial Up Networking
# channel on a Bluetooth device and binding a /dev/rfcomm port to it.
#
# By Sven­G ran Bergh, 2005­11­03
# Update 2007­04­03 Added release of passive/closed rfcomm port.
#
# Use this /dev/rfcomm port
RFPORT=1
# Name of Bluetooth device to bind to:
BTNAME="S­Gs P900"
success() {
echo ­e $"\\033[60G[ \\033[1;32mOK\\033[0;39m ]"
return 0
}
failure() {
echo ­e $"\\033[60G[\\033[1;31mFAILED\\033[0;39m]"
exit 1
}
# Check that local Bluetooth device is active
echo ­n $"Checking for local Bluetooth device..."
hciconfig | grep 'UP RUNNING' &> /dev/null \
&& success || failure
# If the rfcomm port exists but is currently not in use, try to release
it
if [ "`rfcomm show ${RFPORT} 2> /dev/null | awk ­­ '{print $5}'`" ==
"closed" ];
then
echo ­n $"Trying to free closed port /dev/rfcomm${RFPORT}..."
rfcomm release ${RFPORT} &> /dev/null \
&& success || failure
fi
# Check if the rfcomm port is free
echo ­n $"Checking that /dev/rfcomm${RFPORT} is free..."
rfcomm show ${RFPORT} &> /dev/null \
&& failure || success
# Check for the remote Bluetooth device
52