Acceleration - Acer Ferrari 3400LMi Manual

F8­x86_64 on the Acer Ferrari 3400LMi
we design a script to run once Fn­F5 is pressed.
The Fn­F5 button should provide a simple, basic and robust functionality that
works for any external monitor. I prefer to toggle through the available connected
external outputs, while keeping the internal monitor alive. Furthermore, each
connected external output is present in two operating modes. First the external
output mirrors the internal display, then it extends the desktop by operating
side­by­side with the internal display. When both VGA­0 and S­video are
connected the following operation modes are toggled each time Fn­F5 is pressed.
LVDS (single head)
●
LVDS + VGA­0 (mirror)
●
LVDS + VGA­0 (side­by­side)
●
LVDS + S­video (mirror)
●
LVDS + S­video (side­by­side)
●
If a certain external device is not connected those modes are skipped.
Consequently, the sequence above will only appear when both VGA­0 and S­video
are connected. With only VGA­0 connected the sequence will only include the first
three modes from above.
Notice that the internal monitor may be dimmed at any time by pressing the
Fn­F6 button. Thus, turning off the internal monitor is not included in the script.
The script is outlined in Appendix B and may be downloaded at
http://ferrari.database.se/3400/f8/dual­head.sh.
The script also includes some other common operation to manipulate the
graphical outputs. To see all supported operations, try:
dual­head.sh help
Binding this script to the Fn­F5 button is then configured in the
KDE Control Center ­> Regional & Accessibility ­> Input Actions.
If you run a more permanent dual­head setup you may want to configure the
preferred default settings in xorg.conf. This is done by the Monitor sections and
the lines
Option "Monitor­<output>" "..."
in the Device section of the xorg.conf file.
10.3 3D acceleration
3D hardware acceleration is provided by the dri module. This module is loaded
by default by the radeon driver, so no additional configuration is needed in
xorg.conf to get hardware support for 3D. However, any possible optimizations
that might improve performance are desirable.
19