Lcd Panel; Hard Disk Drive - Toshiba NB 100 User Manual

NB 100 Series
Keyboard
Keyboard problems can be caused by your setup configuration. For more
information refer to Chapter 5,
and Passwords.
Problem
Some letter keys
produce numbers
Output to screen is
garbled

LCD panel

Apparent LCD problems may be related to the computer's setup. Refer to
Chapter 7,
Problem
No display
Markings appear on the
LCD screen.
Problems above remain
unresolved or other
problems occur

Hard disk drive

Problem
Computer does not
boot from hard disk
drive
9-6
Procedure
Check that the numeric keypad overlay is not
selected. Press Fn + F11 and try typing again.
Make sure the software you are using is not
remapping the keyboard. Remapping involves
reassigning the meaning of each key. See your
software's documentation.
If you are still unable to use the keyboard,
consult your dealer
BIOS Setup and Passwords, for more information.
Procedure
Press hot keys Fn + F3 to change the display
priority, to make sure it is not set for an external
monitor.
They might have come from contact with the
keyboard or touchpad. Try wiping the LCD gently
with a clean dry cloth. If markings remain, use
LCD cleaner. Be sure to let the LCD dry before
closing it.
Refer to your software's documentation to
determine if the software is causing the difficulty.
Contact your dealer if the problems continue.
Procedure
Check if a diskette is in the diskette drive or a
CD/DVD is in the optical disc drive. Remove any
diskette and/or CD/DVD and check Boot priority.
Refer to Chapter 7,
There may be a problem with your operating
system files. Refer to your OS documentation.
The Keyboard and Chapter 7,
Boot Priority
BIOS Setup
section.
User's Manual