Additional Ac Adaptor; Usb Fdd Kit; External Monitor - Toshiba NB 100 User Manual

Removing the SIM card
To remove the SIM card, follow the steps below.
1. Turn the computer off in boot mode. Refer to the
2. Remove all cables connected to the computer.
3. Directly pull out the sim card inside the socket to eject it.
4. Grasp the card and remove it.

Additional AC adaptor

If you frequently transport the computer between different sites such as
your home and office, purchasing an AC adaptor for each location will
reduce the weight and bulk of your carrying load. PA3467U-1ACA/
PA3467E-1AC3.

USB FDD Kit

The 3 1/2" external FDD drive module can be connected to the USB port.

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. The computer supports VGA and Super VGA video
modes. To connect a monitor, follow the steps below.
The hibernation and standby feature can be used with an external monitor.
Simply enable hibernation and standby and the computer will maintain the
data as it is displayed on the external monitor.
1. Connect the monitor to the external monitor port.
2. Turn the monitor's power on.
When you turn on the power, the computer automatically recognizes the
monitor and determines whether it is color or monochrome.
You can use the BIOS Setup to select between
LCD+Analog RGB
Passwords.
If you have selected
the BIOS Setup, both the external monitor and the internal LCD will be
active when you turn on the computer. If
only the external monitor will be active.
To change the display settings, press Fn + F3. If you disconnect the
monitor before you turn the computer off, be sure to press Fn + F3 to
switch to the internal display. Refer to Chapter 5,
on using hot keys to change the display setting.
If you set LCD+Analog RGB for the computer's display, you must set the
computer's display resolution to the same as that of the external monitor
or other device, such as a projector.
User's Manual
section in Chapter 3.
displays. Refer to Chapter 7,
LCD+Analog RGB
Turning off the power
Auto-Selected
BIOS Setup and
under the Display
Auto-Selected
The Keyboard, for details
Optional Devices
and
options of
is selected,
8-8