Grounding And Ac Power Cord Connections; Assembly Instructions - DieHard 28.7123 Operator's Manual

8.

gROUNDINg aND ac POWER cORD cONNEctIONS

8.1 This battery charger is for use on a nominal 120-volt
circuit and has a grounded plug that looks like the plug
illustrated. The charger must be grounded to reduce
the risk of electric shock. The plug must be plugged
into an outlet that is properly installed and grounded in
accordance with all local codes and ordinances. The
plug pins must fit the receptacle (outlet). Do not use with
an ungrounded system.
8.2
the outlet, have a proper grounded outlet installed by a qualified electrician. An
improper connection can result in a risk of an electric shock or electrocution.
NOtE: Pursuant to Canadian Regulations, use of an adapter plug is not
allowed in Canada. Use of an adapter plug in the United States is not
recommended and should not be used.
8.3 Recommended minimum AWG size for extension cord:
• 100 feet long or less - use a 10 gauge extension cord.
• Over 100 feet long - use an 8 gauge extension cord.
9.

aSSEMBLY INStRUctIONS

9.1 It is important to fully assemble your charger before use. Remove all cord
wraps and uncoil the cables prior to using the battery charger. Follow these
instructions for assembly.
(2) 10-32, thread cutting screws
(4) ¼-20, thread cutting screws
(4) Phillips head sheet metal screws
(2) wheels
(1) axle
(2) axle caps
(2) axle brackets
(1) handle
(1) foot
RISK Of ELEctRIc ShOcK OR fIRE.
Never alter the AC cord or plug provided – if it does not fit
PaRtS tOOLS NEEDED
3/8" wrench (for mounting foot)
5/16" wrench (for mounting wheels)
hammer
screwdriver (flat blade)
screwdriver (Phillips)
7
• •