Functions; Remote I/O And Remote Registers; Address Map Of The Remote Register - AND CC-Link Interface AD-4402-OP-20 Instruction Manual

4. 4. 4. 4. Functions

Functions
Functions Functions
The installed option can read the AD-4402 weighing data and write parameters to
control it from the master station (EX. program controller of CC-link).
There are two ways to operate the option.
Direct operation of the remote input and output with the remote registers.
The communication command operation.
4.1.

4.1. Remote I/O and Remote Registers

4.1. 4.1. Remote I/O and Remote Registers Remote I/O and Remote Registers Remote I/O and Remote Registers
4.1.1. 4.1.1.

Address Map of the Remote Register

Address Map of the Remote Register
4.1.1. 4.1.1. Address Map of the Remote Register Address Map of the Remote Register
Remote Register for the AD-4402 to the Master Unit
Caution
Do not write any parameter to addresses "Not used" by the remote output RY
or remote register RWw. It may cause an operation error.
The addresses "Not used" by the remote input RX and remote register RWr are
variable.
Station No. Remote register Buffer
1
2
3
4
RWr000
RWr001
RWr002
RWr003
RWr004
RWr005
RWr006
RWr007
RWr008
RWr009
RWr00A
RWr00B
RWr00C
RWr00D
RWr00E
RWr00F
2E0
Net
2E1
2E2
Gross
2E3
2E4
Total weight
2E5
Kind of error
0: No alarm, no error
1: Weighing sequence error
2E6
2: Zero error
3: Alarm 1
4: Alarm 2
2E7 Error No.
2E8 8 bits current material code
2E9
2EA Not used
2EB
2EC
Command data reply
2ED
2EE Command code reply
2EF Not used
Page 6
Assumed that station No. is "1".
Description
32 bits,
16 bits,
AD-4402-20