Maintenance; Monitor Mode; Operation And Display - AND CC-Link Interface AD-4402-OP-20 Instruction Manual

5. 5. 5. 5. Maintenance

Maintenance
Maintenance Maintenance
5.1.

5.1. Monitor Mode

5.1. 5.1. Monitor Mode Monitor Mode Monitor Mode
The monitor mode is used to check the indicator during the weighing sequence.
5.1.1. 5.1.1. 5.1.1. 5.1.1.

Operation and Display

Operation and Display Operation and Display Operation and Display
To enter the monitor mode
To select the kind of data
of RX, RY, RWr, RWw
To select an I/O No. or register No.
To exit the mode
(To return to weighing mode)
Remote input/output and Remote
register: RX, RY, RWr, RWw
Station No.
Baud rate
AD-4402-20
Press and hold the ENTER key and press the
key in weighing mode.
Select the menu
ENTER key.
Select menu
The
The
The ESC key.
ST RX 00F-000 BUF.0E0
1 01001000 11011011 b
BR RY 00F-000 BUF.160
4 01001000 11011011 b
MSB side
Page 19
check
using the
Option
and the OP-20 slot.
key or key
, key or key
Range of remote input/ output or
Remote register
123
b: Binary numbers
LSB side
h: Hexadecimal numbers
Blank: Decimal numbers
key and the
kg
Buffer address
of master unit