Adjusting The Video Display; Controls For Adjusting The Video Display - 3M ChassisTouch 450 Installation Manual

Controls for adjusting the video display

CHAPTER 3

Adjusting the video display

TM
Your ChassisTouch 450 monitor has several control buttons and an on-screen
menu for adjusting the video display. For example, you can adjust:
Pixel clock and phase to eliminate noise.
!
Image contrast and brightness to your lighting conditions.
!
Horizontal and vertical position of the image.
!
This chapter explains presents guidelines for adjusting the video display and
describes how to use the available monitor controls to adjust the image to your
liking.
Before you make any adjustments:
Set the controls in normal lighting conditions.
!
Display a test image or pattern while making video adjustments.
!
It is recommended that you first set display settings with the video driver on
!
your host computer. After establishing video driver settings, run
the monitor's OSD controls.
"OSD controls" in Table B.
Your ChassisTouch 450 monitor has five controls for adjusting the video display
(Table B). On the back panel there is also an LED indicator and a Power button.
Pressing the Power button turns the monitor's backlights on or off but does not
affect power to the monitor.
3M Touch Systems Proprietary Information
15
and other OSD functions are explained in
AUTO
using
AUTO