Renault Wind Handbook page 83

cRUISE coNtRoL - SPEED LIMItER: cruise control function
2 3 4
Putting the function on
standby
The function is suspended when you:
– button 4 (O);
– depress the brake pedal;
– the clutch pedal or shift into neutral
if the vehicle has an automatic gear-
box.
In all three cases, the cruising speed
remains memorised and the message
"SPEED MEMORY" appears on the in-
strument panel.
Standby is confirmed when the green

indicator light goes out.
Recalling the cruising speed
If a speed is stored, it can be recalled,
once you are sure that the road condi-
tions are suitable (traffic, road surface,
weather conditions, etc.).
With a vehicle speed above 20 mph (30
5
km/h), press switch 5 (R).
Note: if the speed previously stored is
much higher than the current speed,
the vehicle will accelerate more rapidly
to reach this threshold.
When the cruise control is set to
standby, pressing switch 2 (+) re-
activates the cruise control func-
tion without taking into account
the stored speed: it is the speed at
which the vehicle is moving that is
taken into account.
(4/4)
1
Switching off the function
The cruise control function is deacti-
vated if you press switch 1: in this case
a speed is no longer memorised.
 
The and indicator lights on the
instrument panel go out, confirming that
the function is deactivated.
Putting the cruise control
on standby or switching it
off does not cause a rapid
reduction in speed: you
must brake by depressing the brake
pedal.
2.19