Tool Kit (Jack, Wheelbrace, Etc.) - Renault Wind Handbook

tOOL KIt/WHeeL trIm – WHeeL
2
1
The tool kit is located in the luggage
compartment: lift the luggage compart-
ment carpet then unscrew the central
mounting.
The tools included in the tool kit depend
on the vehicle.
5.6
Wheelbrace 1
3
This is used to tighten or release the
wheel bolts.
towing hitch 2
Refer to the information on "Towing" in
Section 5.
Jack 3
When replacing the jack, fold it cor-
rectly and position the wheelbrace cor-
rectly before replacing it in its position.
4
Hubcap tool 4
This tool is used to remove the wheel
trims.
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then position
it correctly in its housing: there is a
risk of injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.