Starting The Engine; Starting/Stopping The Engine - Renault Sandero Handbook

STARTING/STOPPING THE ENGINE

Starting the engine

In very cold conditions (temperatures
below –20°C): so that it is easier to
start the engine, switch on the ignition
for several seconds before starting the
engine.
Make sure the engine immobiliser is not
activated. Refer to the information on
the "Engine immobiliser" in Section 1.
Never leave your vehicle with the key or remote control inside and never leave a child (or a pet) unsupervised, even
for a short while.
The reason for this is that the child may endanger himself or others by starting the engine, activating equipment such
as the window winders for example, or locking the doors.
Risk of serious injury.
Never switch off the ignition before the vehicle has stopped completely. Once the engine has stopped, the brake servo,
power assisted steering and passive safety equipment such as air bags will no longer operate.
The steering is locked when the key is removed.
Vehicle equipped with an automatic
gearbox
Before starting, move the lever to posi-
tion N or P.
Refer to the information on the
"Automatic gearbox" in Section 2.
Petrol injection
Engine warm or cold
– Activate the starter without de-
pressing the accelerator.
– Release the key as soon as the
engine starts.
É
Diesel injection
Turn the ignition key to ignition "On" po-
sition M, and hold this position until the
preheating warning light goes out.
Move the key to "Start" position D with-
out accelerating. Release the key as
soon as the engine starts.
Stopping the engine
With the engine idling, turn the key
back to "Stop" position St.
2.3