Renault Sandero Handbook page 128

WHEEL TRIM/WHEELS
7
6
Central wheel trim with
concealed wheel bolts
Remove the wheel trim using the
hubcap tool by inserting tool 6 into
valve recess 7.
To refit the wheel trim, align recess 7
with the wheel rim, clip the wheel trim
back in place and use tool 6 to tighten
the screw.
We would advise you to note the
number engraved on the tool so that
you can replace it if it is lost.
5.8
(2/2)
1
Central wheel trim with
concealed wheel bolts
Remove it using hubcap tool 1, insert-
ing the tool into recess 8 provided.
To refit it, turn it so that it is aligned with
the rim and clip it in place.
8
Central wheel trim with
visible wheel bolts 9
To remove it without removing the
wheel, press it at the points indicated
by the arrows.
Turn it so that the retaining brackets
holding it in place behind the wheel
bolts are released.
To refit the hubcap, proceed in reverse
order.
9