Be sure unit is full of water and plugged
Set the =an selection switch to "2". This
wilt allow both fans to operate if the humi-
distat senses humidity is needed_
Set speed control to tow.
Set Humidity Control to medium position.
NOTE: Humidifier shou]d operate with
humidity control on the recommended
f it does not the humidity
is at a retativefy high level To test the unit
under this condition, turn Humidity Control
all the way to MAX and unit should begin to
operate. After unit has been tested, set
Humidity Control to MEDIUM or desired
Allow 24 hours for humidifier to adjust.
If humidity level in home is sufficient, the
humidifier will only operate with Humidity
Control set on maximum.
Water damage may result
starts to form on windows
or walls, Humidity Control setting should
be lowered until condensation
If humidifier stops running, the humidity
level is at the normal reeuirements for that
setting or [tis adjusting to the home condi-
tions. The table below shows approximate
relative humidity percentages
respond to the vanous settings of the
Hum idity Control.
The slide humidify switch shows settings
for your t3 gallon model.
20°F & above
Tips for Best Performance
1. Position the humidifier at least 2 inches
from any watt and away from any heat
"Cleaning of Humidifie_' section of this
2. DO net restrict airflow from entering or
5. Replacement of the evaporative wicking
exfting _he humidifier:
at least once per humidification
3. Use Sears:recommended
season or more depending
32-149:00 to retard bacteria growth that
conditions in your area,
may cause odors and may be harmful to