Buttonhole Function - Kenmore 385.15218400 Service Manual

SEWING MACHINE DIV.20 MODEL 385.15218400
MECHANICAL ADJUSTMENT
BUTTUNHOLE FUNCTION
TO CHECK:
BOTTONHOLES SHOULD BE ABOUT 3MM LONGER THAN THE LENGTH SET BY THE R
FOOT.
IF THIS LENGTH CANNOT BE OBTAINED, THEN CHECK AND ADJUST AS FOLLOWS:
ADJUSTMENT PROCEDURE:
1. OPEN THE FACE COVER.
2. TURN THE ADJUSTING SCREW IN THE DIRECTION OF (A) IF THE BUTTONHOLE
STITCH LENGTH IS LONGER THAN THE STANDARD,OR IN THE DIRECTION OF (B) IF
THE BUTTONHOLE STITCH LENGTH IS SHORTER THAN THE STANDARD.
STANDARD
f
ABOUT3MM
J
ADJUSTING SCRE_
:q
BUTTONHOLE __
LEVER
': _: ==.,.¢:_.
q:_..&... ,._..- _A_
"I "- 7""....__
"" ".-. , "'. ".::'_.?&'4"-_.
_B_ --._._..,
-4: _.j
24