Kenmore Three-Speed Triple Dispenser Automatic Washers Owner's Manual & Installation Instructions page 13

Hide thumbs Also See for Kenmore Three-Speed Triple Dispenser Automatic Washers:
Table of Contents

Advertisement

B. REMOVE
SHIPPING
STRAP
Removing
the shipping
strap is
necessary
for smooth
operation.
If tlhe shipping
strap
is not
removed,
the washer
will make
excessive
noise.
To prevent floor damage, set washer onto
cardboard
before moving across floor.
Move washer (:lose to its final location.
STI=_P1. Read, then remove the label
over the electrical plug and shipping strap.
STEP 2. Pull the yellow shipping
strap
completely
out of the washer. There
should be three cotter pins on the end
of the shipping
strap when it is pulled
out of the washer. The electrical plug is
attached to this shipping strap.
STEP 3. Pull firmly to remove the
other end of the shipping strap pinned
to the back of washer. This will
release the rear self-leveling
legs.
Pin
PULL
i7 _-; ,"
Elertricalplug
/
STEP 4. Cut the shipping strap about
16 inches from plug end. Look for the
words "CUT HERE:' Discard end with
three cotter pins. Slide remainder
of
shipping
strap free from the electrical
plug. You will use this to secure the
drain hose.
O
O
\
PULL
Pin
13

Advertisement

Table of Contents
loading

Table of Contents