Download Print this page

Kenmore 665.1472 Series Use & Care Manual page 10

Hide thumbs Also See for 665.1472 Series:

Advertisement

Available languages

Available languages

Installation
1.
Remove the mounting
screws attaching
the foot pedal
to
the compactor.
Remove foot pedal.
A
A. Mounting
screws
B. Foot pedal
2.
Remove mounting
screws attaching
the toe guard to the
compactor.
Remove toe guard.
3.
Remove the mounting
screws attaching
the decorative
panel to the compactor.
Remove decorative
panel and
discard
mounting
screws.
4. Align the bottom
of the custom panel with the bottom
of
the drawer
front.
5. Secure the custom panel from the back using 4 - #8 x 1"
wood screws as shown.
6. Attach a 15" (38.1 cm) x 1/2" (13 mm) quarter-round
filler
along the top of the drawer
front using glue or screws.
7.
Reinstall the toe guard using the existing mounting screws
and 1/2" washer. Then, reinstall the foot pedal.
A
A. Custom
panel
B. 15" (38.1
cm) x _ " (13 cm)
quarter-round
C. Pane/screw/ocations
D. Toe guard
E. Washer
F. Toe guard
mounting
screw
COMPACTOR USE
The compacting
ram is the part of the compactor
which
compresses the trash. The compacting
ram does not go to the
bottom
of the drawer. You will not see compacting
of trash
the first few times you load the compactor.
NOTE: The compactor
drawer
should be more than 1/2 full
before the compactor
can begin to compress the load.
You may hear a noise when glass breaks. Strong glass bottles
may not break at all. The trash in a full compactor
bag will
be about 1/4the size of its original
bulk.
I
I
Load bulky trash,
bottles,
and cans
in the center
of the
drawer. Bottles or cans not placed in the center may become
caught
between the ram and the drawer. The Drawer
Monitor
Switch then senses a "misload"
and causes the ram
to return to the "up" position
without
compacting.
IMPORTANT:
Do not push items down into compactor
with
hands or feet.
NOTE: You will not see compacting
of trash the first few
times you load the compactor.
The compactor
drawer
should
be about 1/2full before the compactor
can begin to compress
the load.
Open the drawer.
Lift and pull the handle or press the
foot pedal to open the drawer.
NOTE: Pressing the foot pedal opens the container
only
3" to 6" (7.6 cm to 15.2 cm), depending
on the load.
2. Place trash in compactor.
10

Advertisement

loading