Adjusting Oven Temperature - Kenmore 790.9216 Series Use & Care Manual

Setting Oven Controls
Using AirGuard
TM
feature
(some models)
Your appliance is equipped with a catalytic oven exhaust
cleaner that may be turned on during any active oven
cooking process. This feature helps remove smoke and
eliminates 85°/'0 of the odors generated when using your
oven.
The AirGuard indicator icon light will glow anytime the
AirGuard feature is actively cleaning.
If you wish to have this feature clean the oven exhaust
AFTER oven cooking
has started,
press Air_
keypad.
Guard
To turn this feature off,
press Air_
keypad.
Guard
Important note:
AirGuard will turn on automatically and cannot be
manually turned off when Flex Clean is active.
Operating oven lights
The interior oven lights will automatically turn ON when the
oven door is opened.
Press _J to turn the interior oven light ON and OFF
whenever the oven door is closed.
The interior oven lights are located on the rear wall of the
oven interior and are covered with a glass shield. The glass
shield protects the bulb from high temperatures and should
always be in place whenever the oven is in use.
To replace the interior oven lights, see Replacing oven
lights in the Care & Cleaning section.
Adjusting oven temperature
Your appliance has been factory calibrated and tested to
ensure an accurate baking temperature. For the first few
uses, follow your recipe times and temperature
recommendations carefully. If you think the oven is cooking
too hot or too cool for your recipe times, you may adjust
the control so the oven cooks hotter or cooler than the oven
temperature displayed.
The oven temperature offset may be increased as much as
o Jr- o +35 F ( 19 C) or decreased -35°F (-19°C) from the factory
calibrated settings.
Example -- To increase (+) or decrease (-) the oven
temperature by 20°F:
1. Press and hold Bake keypad until the control provides
the 2nd audible tone (about 6 seconds).
2. Enter 2 0 using numeric keypad.
3. Press Flex Clean keypad to toggle between plus (+) if
increasing temperature or minus (-) if decreasing the
temperature. These symbols will show in the display.
4. Press ST_T to accept change.
Important notes:
• Oven temperature adjustments made will not change the
Broil or Flex Clean function temperatures.
• If the temperature shows an adjustment of -20°F, and a
+20°F adjustment is needed, you can toggle between the
minus (-) or plus (+) in the display when pressing Flex
Clean keypad (See step 3).
DO NOT USE oven thermometers such as those found in
grocery stores to check the temperature settings inside
your oven. These oven thermometers may vary as much
as 20 to 40°F from actual temperatures.
The oven temperature adjustment may be made if your
oven control has been set to display °C (Celsius)
temperatures. Minimum and maximum settings for
Celsius are plus (÷) or minus (-) 19°C.
24