Integra DBS-30.3 Instruction Manual page 50

Blu-ray disc player
Hide thumbs Also See for DBS-30.3:
Table of Contents

Advertisement

Problem
Cannot play back a disc.
USB flash drive cannot be read.
Cannot play back JPEG files from a disc.
Cannot play back MP3 files from a disc.
Cannot play back WMA files from a disc.
No return to start-up screen when disc is
removed.
in the upper right hand corner of the
TV screen.
Buttons do not work or the unit stops
responding.
The unit does not respond to some operating
commands during playback.
The unit cannot read Blu-ray Disc™ / DVD/
CD.
Angle does not switch.
Playback does not start when the title is
selected.
The password for rating level has been
forgotten.
Cannot find a JPEG file.
Cannot find an MP3 and WMA file.
Error message appears when I select "Auto"
in the "Player Menu".
50
Make sure that the product supports the disc.
Check the region code of the disc. This unit supports the following region codes.
- Blu-ray Disc™
:
"A"
- DVD
:
"ALL" or "1"
Clean the disc.
The format of the drive is not accepted by this unit or the drive is not compatible.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the disc was recorded in the UDF, ISO9660 or JOLIET format.
Make sure that the bit rate of the MP3 files is between 112 and 320 kbps.
Make sure that the sample rate of the MP3 files is 32 kHz, 44.1 kHz or 48 kHz.
Make sure that the sample rate of the WMA files is 44.1 kHz or 48 kHz.
Reset this unit by turning it off for 30 seconds, then on again.
The operation is not possible.
To completely reset the unit, press and hold [. On / Standby] on the front panel
for 10 seconds to shut down the unit or unplug the AC cord from the AC outlet for
5-10 seconds.
Operations may not be permitted by the disc. Refer to the instructions of the disc.
Condensation? (Let sit 1 or 2 hours)
Check if the disc is compatible with this unit. (Refer to page 25.)
Wipe dirt off the disc or replace the disc.
The angle cannot be switched for Blu-ray Disc™ / DVD which do not contain multiple
angles. In some cases multiple angles are only recorded for specific scenes.
Check setting of "BD Rating Level" or "DVD Rating Level". (Refer to page 46.)
Enter the default password "4737", then your forgotten password will be cleared.
Make sure that the selected group (folder) does not contain more than 9,999 files for
Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than 9,999 files for
Blu-ray Disc™ / DVD / USB flash drive, and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3 for MP3, and .wma or .WMA for
Windows Media™ Audio.
Make sure that the unit is connected to an HDMI CEC compatible TV and the
"HDMI CEC" is set to "On".
This error message may appear when your TV's OSD language is not supported by
this unit.
Tip
EN

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents