Panel Features - Kenmore 796.6900 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

WARN ING:
To redooe
the risk ofnre, electrlc shock,
orinjory topersons,
reod this entire
rnonuol, indudlng the Importont Sofety Instructions, before operoting this dryer.
CONTROL
PANEL FEATURES
POWER
Iii_ii/
U
START/PAUSE
O
O
POWER (ON/OFF)
BUTTON
Press to turn the dryer ON. Press again to turn the
dryer OFF. Pressing the POWER button during a cycle
will cancel that cycle and any settings will be lost.
CYCLE SELECTOR KNOB AND CYCLES
The cycle selector knob is used to select the desired
dry cycie by rotating the knob in either direction until
the desired cycle LED is illuminated.
Once the desired
cycle has been selected, the standard presets for that
cycle will show in the display. These settings can be
adjusted using the cycle modifier or option buttons
any time before starting the cycle (refer to pages 20
and
21).
START/PAUSE BUTTON
Press this button to start the selected
cycle.
The
dryer will display the estimated
time (AUTO DRY) or
set time (TIMED DRY) remaining
and start tumbling.
To pause the cycle at any time, open the dryer door
or press START/PAUSE. To resume the cycle where it
was stopped,
press START/PAUSE again.
NOTE: if the dryer has been stopped for more than
four minutes, the dryer wilt turn off automatically
and all settings will be lost.
0
O
O
0
OPTION
BUTTONS
These buttons
allow
you to select
cycle
options.
Some
of the option
buttons
have secondary
functions.
The controls
can be locked
or unlocked
by
pressing
and
holding
the CONTROL
LOCi<
button
for five seconds.
CYCLE MODiFiER
BUTTONS
Use these buttons to adjust the settings for the
selected cycle. The settings light up above the
buttons to show the current selection (refer to page
24). The defautt temperature
setting cannot be
changed
in AUTO DRY cycles. AUTO DRY cycles are
modified
using the Dry Level button.
TiME AND
STATUS
DISPLAY
The display
shows the estimated
time
remaining
for
auto
cycles
and
actual
time
for timed
cycles.
The
status
of the cycle
is also displayed.
The CHECK
VENT
indicator
will
illuminate
if there
is a serious
restriction
in the exhaust
system
(refer
to page
23).
MY CYCLE
if you have a special combination
of settings that
are used frequently,
you can save these settings as a
MY CYCLE.
NOTE: To protect your fabrics, not all settings are allowed
in all cycles.
18

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7900Elite 796.6900Elite 796.7900

Table of Contents