Kenmore 580.72187 Owner's Manual page 4

OBSERVE ALL LOCALCODES AND
ORDINANCES.
DONOT,UNDER ANYCIRCUMSTANCES,
REMOVE THEPOWER SUPPLY CORD
GROUND PRONG.
ELECTRICAL GROUND IS REQUIRED O N
THISAPPLIANCE.
A 250-volt 60 Hz,AConly,20Afusedand
properly g rounded
electrical supply is required.
A time delay fuse or time delay circuit breaker
is recommended. Use a dedicated circuit,
serving only this appliance.
DO NOT USE AN EXTENSION CORD.
RECOMMENDED GROUNDING METHOD
For your personal safety, this appliance must
be grounded. This appliance has a power
supply cord with a 3-prong grounding plug. To
minimize possible shock hazard, the cord must
be plugged into a mating grounding type wall
receptacle and grounded in accordance with
the National Electrical Code (ANSt/NFPA 70)
latest edition and all local codes and
ordinances. If a mating wall receptacle is not
available, it is the personal responsibility and
obligation of the customer to have a properly
grounded 3-prong wall receptacle installed by a
qualified electrician.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result
in death, fire, or electrical shock.
Line Cord Plug
" _/Do not, under any -"
_-_ circumstances, cut or
--- _ remove the grounding prong
_ from the plug.
Power supply cord with
3-prong grounding plug
Use Wall Receptacle Power Supply
Standard 250V,
3-wire grounding
receptacle rated
20A, 250V AC
Use 20 AMP,
time delay fuse
or circuit
breaker.
-4-