Removing The System Board - Dell Inspiron 1150 Service Manual

Back to Contents Page
System Board
Dell™ Inspiron™ 1150 Service Manual

Removing the System Board

CAUTION: Before performing the following procedures, read the safety instructions in your Owner's Manual.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
The system board's BIOS chip contains the Service Tag sequence, which is also visible on a barcode label on the bottom of the computer. The replacement kit
for the system board includes a CD that provides a utility for transferring the Service Tag sequence to the replacement system board.
1. Follow the instructions in "Before Working Inside Your
2. Remove the hard drive.
3. Remove the CD or DVD drive.
4. Remove the memory module(s).
5. Remove the modem.
6. Remove the Mini PCI card.
7. Remove the keyboard.
8. Remove the display assembly.
9. Remove the EMI shield.
10. Remove the palm rest.
11. Remove the microprocessor thermal-cooling
12. Remove the microprocessor.
13. Remove the speakers.
14. Remove the two M2.5 x 5-mm screws from the battery bay shield, and remove the shield.
1 battery bay
2 battery bay shield
3 M2.5 x 5-mm screws (2)
15. Remove the two M2.5 x 5-mm system board screws from the hard drive cage.
Computer."
assembly.