1 pull-tab
2 display assembly
3 M2.5 x 5-mm screws (4)
4 hinge brackets (2)
5 computer base
11. Lift the display assembly up and out of the computer base.
Display
1 screw covers (2)
display bumpers (3)
2 M2.5 x 5-mm screws (5)
3 display bezel
4 display panel
5 M2 x 3-mm screws (8)
6 top cover
7 display-feed flex cable
Display Bezel
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.
1. Follow the instructions in
"Before Working Inside Your
2. Remove the keyboard.
3. Remove the
display
assembly.
4. Use a plastic scribe to pry the two screw covers and three display bumpers out of the screw holes located on the front of the bezel.
5. Remove the five M2.5 x 5-mm screws located on the front of the bezel.
Computer."