Table of Contents
Advertisement
Installing the thermal fan
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the thermal fan and provides a visual representation of the installation procedure.
Steps
1. Place the thermal fan into its slot on the system board.
2. Align the screw holes on the thermal fan to the screw holes on the system board.
3. Replace the two screws (M2x3) to secure the thermal fan to the system board.
4. Connect the thermal-fan cables to the connector on the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
28
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
