Table of Contents
Advertisement
Continuing to use the product may result in
damage or injury.
■
To avoid injury, keep your fingers away from the
label exit slot when printing or using the cutter.
■
Avoid locations that are subject to rapid changes in
heat or humidity, shocks or vibrations, or dust.
■
Do not place or store the product in the following
locations: outdoors or in direct sunlight; near
sources of excessive heat, humidity, shocks,
vibrations, or dust; where it may get wet or be
exposed to excessive humidity; on an unstable
place such as a shaky or inclined surface; near
potential sources of electromagnetic interference
such as loudspeakers or the base units of cordless
telephones.
■
The product and product manuals may come
packaged in plastic bags. Keep plastic bags away
from small children to avoid any risk of suffocation.
■
If you will not be using the product for a long
period, unplug the power cord and remove the
batteries.
■
Before cleaning, unplug the power cord and
remove the batteries. Use only a dry, soft cloth to
clean the product; do not use liquid or chemical
cleaners.
■
Operate the keyboard gently.
■
Take care not to cut your fingers when cutting a
tape with scissors.
Batteries
■
Use batteries properly to avoid injury or fire caused
by leaking, overheating, explosion, erosion, or
damage to the product.
■
Keep batteries out of reach of children. If battery
acid gets into your eyes or on your skin,
immediately rinse the affected area thoroughly
with water and seek medical treatment. If a battery
is swallowed, seek medical treatment immediately.
■
When replacing batteries, follow these safety
instructions:
■
If battery acid leaks from a battery, wipe it off
with a cloth and replace the battery with a new
one.
■
Do not use new and old batteries together or
mix different types of batteries.
■
Use only AA alkaline batteries. You cannot use
rechargeable batteries with your product.
■
Insert batteries so that the polarities (+ and -)
are correct.
Notices
|
33
Advertisement
Table of Contents
