Wrapped Labels - Epson LabelWorks Cable and Wire Kit User Manual

Wrapped labels

Wrapped labels are useful for tight spaces
where flags are too large or only a short
identifier is necessary.
1. Press .
2. Press until you see Wrap, then press
to select it.
3. Press to select the length, then press
.
4. Enter your text, then press
22 | Cable and Wire Management
Wrap label tips
■
■
■
■
■
■
.
For small cables (1-2 mm), use a flag label
to increase readability.
If you only have a single line of text,
repeat it on multiple lines to improve
readability.
Use multiple labels on a single cord to
include more information.
Include a label on both ends of the cable.
Do not use a regularly printed label
(lengthwise) as a wrapped label —
bending the cord will eventually cause
the label to detach from the cord.
Use reflective labels in dark locations
where visibility is limited.