Labelwriter Printer Features - Dymo LabelWriter 450 Quick Start Manual

Become familiar with the printer's major components. See Figure 2.
USB
connector
Cable
channel

LabelWriter Printer Features

Your LabelWriter printer is a direct thermal printer and does not use ink or toner.
Instead, the printer uses heat from a thermal print head to print on specially
treated labels. Labels are the only supplies you will ever need to buy.
The form-feed button on the front of the printer advances a single label. The label
eject button is used to remove labels from the printer when changing rolls.
The LED status light visually shows the current state of the printer:
•
Solid blue - power is on and the printer is ready.
•
Flashing blue - labels are not loaded properly or label spool is empty.
2
PAGE 3 OF 10
DC power
Platen
connector
release
Label feed path
and tear bar
Form-feed
button and LED
Figure 2
H-1265
Top
cover
Label roll
Label
spool
Label eject
button
1013 IH-1265