Labelwriter Printer Features - Dymo LabelWriter SE450 Quick Start Manual

Become familiar with the printer's major components. See Figure 2.
Top cover
Label spool
Label release
Label feed path
and tear bar

LabelWriter Printer Features

Your LabelWriter printer is a direct thermal printer and does not use ink or toner. Instead, the printer
uses heat from a thermal print head to print on specially treated labels. Labels are the only supplies
you will ever need to buy.
The form-feed button on the front of the printer advances a single label.
The status light visually shows the current state of the printer:
• Solid blue - USB cable is connected and printer is ready to print.
• Solid green - Serial cable is connected and printer is ready to print.
• Dimmed blue or green - printer is in power saving mode.
• Flashing red - Labels are not loaded properly or the label roll is empty.
• Flashing green - Printer is in configuration mode. Refer to the Technical Reference Guide.
2
Label roll
connector
connector
channel
Form-feed button
and status light
Figure 2
Serial
USB
USB 10101 24VDC
00000-0000000 S/N
Cable
DC power
connector
Serial number