Dell PowerEdge 2500 Installation And Troubleshooting Manual page 5

Hide thumbs Also See for PowerEdge 2500:

Table of Contents

NOTE:

If you assign a new system and/or setup password with the jumper plug still removed, the system disables the new password(s) the next time it

boots.

6. Repeat step 1.

7. Install the jumper plug on the PASSWD jumper.

8. Replace the right-side computer cover, and then reconnect the computer and peripherals to their electrical outlets and turn them on.

9. Assign a new system and/or setup password.

To assign a new system password using the System Setup program, see "Assigning a System Password" in the User's Guide.

Back to Contents Page

Table of Contents

Troubleshooting