Removing The Chassis Intrusion Switch - Dell OptiPlex 580 - Small Form Factor Service Manual

Back to Contents Page
Chassis Intrusion Switch
Dell™ OptiPlex™ 580 Service Manual—Small Form Factor
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Chassis Intrusion Switch

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.
1. Follow the procedures in Before Working Inside Your
2. Remove the hard-drive assembly.
3. Disconnect the chassis intrusion-switch cable from the system board.
4. Slide the chassis intrusion switch from its slot in the metal bracket, and then push down the switch to remove it from the computer.
Computer.