Setting A Disc To Protect; Finalising Discs - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 34 Thursday, March 31, 2005 10:04 PM
10
Press [DUBBING].
DVD to VCR duplication will start.
11
Press [STOP S] to stop the
recording.
Note
• When you turn off the unit after setting the Dubbing
Mode to DVD→VCR, the setting will be set to
VCR→DVD automatically.
• Dubbing Mode is available only if the tape or disc is
not copy protected.
• You cannot change the output mode during VCR to
DVD or DVD to VCR duplication.

Setting a disc to protect

VR
DVD-RW DVD-RW
To prevent accidental over-recording, editing or
erasing of recordings, you can protect them using the
Setting menu.
Insert a recordable disc.
1
In stop mode, press [SETUP].
"Easy Setting Menu" or "Advanced Setting Menu"
will appear.
2
Select "Disc" using [Cursor U / D],
then press [ENTER].
3
Select "Disc Protect OFF → ON"
using [Cursor U / D], then press
[ENTER].
4
Select "Yes" using [Cursor U / D],
then press [ENTER].
The disc is protected.
Note
• The Disc Protect setting is available only when a
disc recorded in VR mode is inserted.
• You can select only "Disc Protect ON → OFF" when
a protected disc is inserted.
To cancel the disc protect:
• Select "Disc Protect ON → OFF" at step 3, then
select "Yes."
• If you insert a disc protected with this unit, "Disc
Protect ON → OFF" will appear instead of "OFF →
ON."
EN

Finalising discs

Video VR
DVD-RW DVD-RW DVD-RW DVD-RW
You will need to finalise discs to play them back in
other players.
Finalising may take from several minutes up to an
hour. (A disc recorded in Video mode can take up to
15 minutes. A disc recorded in VR mode can take up
to 60 minutes.)
A shorter recording period on the disc will require a
longer time period for finalisation. Do not unplug the
mains cable during finalisation.
Insert a recordable disc before
finalising.
1
In stop mode, press [SETUP].
"Easy Setting Menu" or "Advanced Setting Menu"
will appear.
2
Select "Disc" using [Cursor U / D],
then press [ENTER].
3
Select "Finalise" using
[Cursor U / D], then press [ENTER].
4
Select "Yes" using [Cursor U / D],
then press [ENTER].
Finalising will start.
Finalize Finalise
Yes Yes Yes Yes
No No
To cancel finalising (DVD-RW only):
At step 4, press [STOP S], select "Yes," then
press [ENTER]. Finalising is cancelled and the
unit switches to stop mode.
Do you want to cancel ?
Yes Yes
Finalising
34
DVD-R DVD-R
DVD
No
10%