Getting Started; Connections - FUNAI DRV-B2734 Owner's Manual

DRV_B2737_B2734.book Page 16 Thursday, March 31, 2005 10:04 PM

Getting Started

3
Scart cable (supplied)

Connections

Connecting to a TV
Connect the unit to a TV after considering the
capabilities of your existing equipment.
Before installation, plug off your TV and this unit.
Using the Scart jack
1
Connect the antenna or cable to the
AERIAL jack of this unit.
2
Connect the RF OUT jack of this unit
to the Aerial jack of your TV. Use the
supplied RF cable.
3
Connect AV1 (TV) Scart jack of this
unit to the Scart jack of your TV. Use
the supplied Scart cable.
Note
• If your TV does not have a Scart jack, use commercially
available Scart adaptor or Scart/RCA cable to connect.
Use only AV1 (TV) or AV2 (DECODER) jack for the
VCR output signals of this unit.
Using the S-VIDEO OUT jack and the AUDIO
OUT jack (only for DVD)
If your TV has an S-Video input jack, use S-Video and
Audio cables to connect.
1
Follow steps 1 and 2 above.
2
Connect S-VIDEO OUT jack of this unit
to the S-Video input jack of your TV. Use
commercially available S-Video cable.
EN
To Aerial jack
Audio/Video cable (not supplied)
Scart/RCA
3
cable (not
supplied)
DVD/VCR DVD
DIGITAL AUDIO S-VIDEO
AV2(DECODER)
AUDIO OUT OUT OUT
L
OPTICAL COAXIAL
AV1(TV)
R
3
Connect the AUDIO OUT jacks of this
unit to the Analogue audio input
jacks of your TV. Use a commercially
available Audio cable.
Note for a TV with no S-Video input jacks or
Scart jack:
• This unit has no RF modulator, so this type of TV
cannot be used.
Connecting to external equipment
This unit has three input terminals, AV1 or AV2 on the
rear panel and AV3 on the front panel. Be sure that all
the units are off before making connections.
Recording from a DVD player, VCR or other Audio-
Video equipment with a Scart output jack (AV2)
16
Antenna
Cable
Signal
or
2
Scart adaptor
(not supplied)
RF cable
(supplied)
DVD/VCR
AERIAL
1
RF OUT
RF cable
(not supplied)
*
The unit is for the DRV-B2737.
AUDIO IN S-VIDEO IN
DVD/VCR DVD DVD/VCR
DIGITAL AUDIO S-VIDEO
AV2(DECODER)
AUDIO OUT OUT OUT
AERIAL
OPTICAL COAXIAL L
AV1(TV)
RF OUT
R
*
The unit is for the DRV-B2737.