Canon Vixia HF R40 Instruction Manual page 10

TrimmingScenes
You can trim MP4 scenes by removing everything up to a certain point
or everything after a certain point. By doing so, you leave only memo-
rable moments to keep for posterity.
Operating modes:
I I
1 Play back the desired scene (C]_ 50).
2 Touch the screen and then touch [|11] to pause the playback.
3 Open the screen for trimming scenes.
4 Bring the scene to a precise point, if necessary.
The point at which is movie will be trimmed is indicated by the _'
marker.
Playback controls will appear on the screen ([_ 52). Use any special
playback modes (fast playback, frame reverse/advance) as
necessary to locate the desired point.
5 Trim the scene.
[Trim] @ seieCi Whetheit0 tdm bef0re 0r aftei the
marker _ Select whether to save as a new scene or write
Touch [Stop] to interrupt the operation while it is in progress.
(_ NOTES
You may not be able to trim the following types of scenes.
- _/1_-_ Scenes copied from the built-in memory to an SDXC
memory card.
- Scenes recorded or copied using another device.
10_ • Advanced Playback and Edtng