Canon ELPH130IS IXUS 140 User Manual page 80

@ Selecting a Range
@ Specifying All images at
@
Choose [Select Range].
@ Following step 2 in "Choosing a Selection
Method" (_ 79), choose
[Select Range] and press the <@>
button.
2 Choose images.
@ Follow steps 2 - 3 in "Selecting a Range"
(_ 77) to specify images.
3 Erase the images.
@ Press the <v> button to choose [Erase],
and then press the <@> button.
Once
Choose [Select All Images].
Following step 2 in "Choosing a Selection
Method" (._IZ_I_79), choose
[Select All Images] and press the <@>
button.
2 Erase the images.
@ Press the <'4><_> buttons to choose
[OK], and then press the <@> button.
Change the orientation of images and save them as follows.
Choose [@].
@ Press the <Q> button, and then choose
[_E_]in the menu (_[._31 ).
2 Rotate the image.
@ Press the <4> or <_'> button, depending
on the desired direction. Each time you
press the button, the image is rotated
90 °. Press the <Q> button to complete
the setting.
_'Usin_ the Menu
Choose [Rotate].
@ Press the <MENU> button and choose
[Rotate] on the [[_] tab (_ 32).
@@
80