Canon ELPH130IS IXUS 140 User Manual page 54

4 Specify the new color.
® Position the center frame over the new
color, and then press the <_> button.
The specified color is recorded.
5 Specify the range of colors to
replace.
® Press the <A><v> buttons to adjust the
range.
® To replace only your specified color,
choose a large negative value. To replace
colors similar to your specified color as
well, choose a large positive value.
® Press the <@> button to return to the
shooting screen.
6 Shoot.
!)) ° Using the flash in this mode may cause unexpected results.
In some shooting scenes, images may look grainy and colors may
not look as expected.
Auto Shooting After Face Detection
(Smart Shutter)
@ Auto Shooting After Smile Detection
The camera shoots automatically after detecting a smile, even without you
pressing the shutter button.
Choose [_,L_] •
® Follow steps 1 - 2 in "Specific Scenes"
(_[_[j49) and choose [_], and then
press the <v> button.
® Press the <4><_,> buttons to choose
[,_,_], and then press the <@> button.
The camera now enters shooting standby
mode, and [Smile Detection on] is displayed.
2 Aim the camera at a person.
® Each time the camera detects a smile, it
will shoot after the lamp lights up.
® To pause smile detection, press the <4>
button. Press the <4> button again to
resume detection.
i) _ Switch to another mode when you finish shooting, or the camera will
continue shooting each time a smile is detected.
o You can also shoot as usual by pressing the shutter button.
o The camera can detect smiles more easily when subjects face the camera and
open their mouth wide enough so that teeth are visible.
@@
54